difference in speeds is uhm, 33 revs per minute to 45 revs per minute - or 0.55 revs per sec for the first and 0.75 for the latter.
finding a "correct" pitch will be difficult as a lot of pitch sliders work in different increments - or are differently calibrated for that matter.
At least I think, it's been a while with vinyl.
the easiest way would be to have the same tracks pref one as a 6" for 45 and a 12" for 33. unlikely so take two tracks where you know they have same bpm and beat match.
look at your pitch slider and you should have "your" correct pitch.
Edit:
sorry the 45 running @ 33 rpm with adjusted pitch that is
I have just been trying to figure out a way to make the job easier
when trying to beat match between 33 to 45 and back again...
I'm using 2x Technics 1200mk2s decks, the pitch control seems
accurate enough (to me atleast), just takes a lot of fine tuning and
takes up too much time.
I will try running the 45s @ 33rpm and see how I go, the only concern
is the track may sound a little (or a lot) strange.
I'll let you know how it goes. Cheers again peepz.
Any other suggestions or advice is appreciated.![]()
I have just been trying to figure out a way to make the job easier
when trying to beat match between 33 to 45 and back again...
I'm using 2x Technics 1200mk2s decks, the pitch control seems
accurate enough (to me atleast), just takes a lot of fine tuning and
takes up too much time.
I will try running the 45s @ 33rpm and see how I go, the only concern
is the track may sound a little (or a lot) strange.
I'll let you know how it goes. Cheers again peepz.
Any other suggestions or advice is appreciated.![]()
i still don't really get the question... you can have 130 bpm on a 33 vinyl and also 130 bpm on a 45 vinyl. when you set the turntable to 33 and play the former, you'll get 130 bpm, and when you set the turntable to 45 and play the latter, you'll also get 130 bpm. the pitch slider will also work the same in both cases, so i don't see the difference?
or are you trying to play a 33 record at 45 speed or vice versa?
Got everything sorted now. Problem fixed. The mixer wasnt showing the correct BPM's. Had to buy a new mixer. Sorry for the confuzzlement!